Nuova Latus

De-oilers Nuova Latus

All of the Luro models, Disks and Tapes

Nuova Latus oil separators can be used on any type of tub or tank, thanks to the many variations in which they are manufactured, and can effectively get rid of superficial oils in any field of industrial and professional application.

Both tape and disc oil separators are available, to satisfy any requirements.

The skimmers are easy to install on the side of a tank, and can be used for tanks that are closed, buried or difficult to access.

These systems also allow you to get rid of bad smells, and to maintain refrigerant quality for a long time, as they remove light immiscible products with the water; these light products create a barrier, prevent air from coming into contact with the emulsion and thus favour the formation of anaerobic bacterial flora.

Luro Centro Vasca

Oil separator Luro Centro Vasca

Technical specifications

Disk:Plexiglass
Disc diameter:400 mm (standard)
Frame:Powder coated metal
Weight:5 Kg
Oil scraper:Teflon
Voltage:220V - 50Hz
Rotation speed:4.5 rev / min. achieved via a motorised gear

Luro 400

Oil separator Luro Quattrocento

Technical specifications

Disk:Plexiglass
Disc diameter:400 mm (standard)
Frame:Powder coated metal
Weight:5 Kg
Scraper:Teflon
Voltage:220V - 50Hz
Rotation speed:4.5 rev / min. achieved via a motorised gear

Luro Nastro

Oil separator Luro Tape

Technical specifications

Tape:Canvas-reinforced plastic
Standard pull-out:600 mm
Frame:Powder coated metal
Weight:6 Kg
Belt or tape width:60 mm
Voltage:220V - 50Hz
Rotation speed:4.5 rev / min. achieved via a motorised gear

Luro Minibelt

Oil separator Luro Minibelt

Technical specifications

Tape:Canvas-reinforced plastic
Standard reg. pull out max:300 mm
Frame:Powder coated metal
Weight:3 Kg
Belt width:30mm
Voltage:220 V - 50 Hz
Rotation speed:4.5 rev / min. achieved via a motorised gear

Luro HP

Oil separator Luro HP

Technical specifications

Tape:Canvas-reinforced plastic
Standard draw-through:600 mm
Frame:Polypropylene
Weight:15 Kg
Belt width:200 mm
Voltage:400 V - 50 Hz three-phase
Available with: operator with a fixed speed - variable speed motor with adjustable speed - air motor with adjustable speed.

Luro Compact

Compact oil separator

Model:COMPACT - 9

Technical Specifications

Adjustable feet.
Made of stainless steel AISI 316L.
Glass pre-filter to protect the pump.
Oil removal filter labyrinth with a large surface area contact
Compressed air supply up to 7 bar.
Draws with double action diaphragm air pump - consumption 250-400 L / M.
flow rate adjustable from 300 to 800 l / h.


Standard accessories:

System for light drafting with a leveling Venturi effect.
Jerrycan for oil accumulation.
Measurements:H605 L400 P400 mm.
Measurement with cart:H990 L400 P450 mm.

 

Model:COMPACT - 3

Technical Specifications

Adjustable feet.
Made of stainless steel AISI 316-L.
Glass pre-filter to protect the pump.
Oil removal filter labyrinth with large surface are contact.
Compressed air supply up to 7 bar.
Draught with double diaphragm pump action - air consumption 40-75 NL / M.
Variable output of 100 to 350 l / h.


Standard accessories:

System for light drafting with a leveling Venturi effect.
Jerrycan for oil accumulation.
Measurements:H400 P300 L300 mm.
Measurement with cart:H790 P400 L300 mm.

Richiedi maggiori informazioni
WANT MORE INFORMATION
ABOUT OUR PRODUCTS?
CONTACT OUR EXPERTS >
Share by: